REFURBISHED - Alphacool Eisblock Aurora GPX-N GPU Water Block with Backplate, Reference RTX 3070, Plexi

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting.

The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. The thickness of the nickel-plated copper block is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.

The copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance.

The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. 

The water block also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles.

The water block includes a backplate specifically designed to provide passive cooling to the top of the PCB.

Technical data:
L x W x H: 122 x 239 x 25 mm
Material cooler: Nickle plated copper
Material top: Acrylic
Thickness cooling fins: 0.6 mm
Threads: 4x G1/4“