Alphacool Eiszyklon Aurora LUX PRO 200mm Fan, Digital RGB

The Alphacool Ice Cyclone Aurora LUX PRO 200mm fan offers not only a wide control range but also an outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.

Digitally addressable 5V RGB LEDs are installed in the frame that illuminate the entire frame on the front. The frame is not transparent throughout but the lighting is provided by narrow slots that are interrupted in four places. On the top are two rows of these slot-shaped recesses. A narrow frame runs along the frame once inside and once outside. This creates a unique lighting that looks very noble. Thanks to the recessed diffusers, the light is evenly distributed. Selective illumination is thus avoided. Individual LEDs are no longer recognizable.

The fan can be controlled from 400 to 800 rpm via the 4-pin PWM connector. At 400 rpm, the fan is almost silent, but still offers a good air pressure set paired with a high static pressure. As a result, the fan can also be used very well on radiators of a water cooling. Thanks to the high airflow, the fan is also ideal for ventilation of a housing. Decouplers can also be found directly on the frame. The soft foam pads reduce the transmission of vibrations to the housing. Another advantage for the silent capability of the fan.

The fan is controlled via a 4-pin PWM connector. The cable is 48 cm long. This allows you to connect the fan to the motherboard or a special controller without further adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector.

Specifications:

Dimensions: 200 x 200 x 27mm
RPM (Speed): 400 - 800 RPM
Connection: 4-pin PWM
Cable Length: 48cm
Power Consumption: 0.14A 
Static Pressure: 1.3 - 1.52 H2O
Max Volume: 7.4 - 23.7 dB(A)

D-RGB Specifications:

LED Type: 5v aRGB
Connection: 3-pin